Enerpac hydraulic cylinders, jacks and rams are available for sale in hundreds of different configurations. Our extensive range of single and double-acting cylinders include general purpose models, high-tonnage, hollow, lightweight, pulling, locknut, production, telescopic, and climbing jacks.
Trusted by professionals on countless industrial applications, Enerpac hydraulic jacks and cylinders are built to handle almost any challenge - from pulling a bearing to moving some of the largest structures on earth. Over the past 100 years, Enerpac products have become synonymous with high-quality hydraulic rams, cylinders and jacks.

•General Purpose Hydraulic Cylinders：

General purpose hydraulic cylinders and rams are built to handle many demanding high pressure hydraulic applications. These cylinders are the heart of the Enerpac cylinder range and are regarded as the industry standard. 
Each cylinder in the RC and RR-Series is constructed from a robust steel body and is finished with a tough baked enamel exterior. Enerpac Cylinders available for sale fully comply to ASME B30.1 (except BRD-RD-Series). 

•Hollow Plunger Hydraulic Cylinders：

Hollow plunger hydraulic cylinders (also known as center-hole cylinders) provide a versatile solution for tensioning, testing, pulling and lifting. A hydraulic cylinder with a hollow plunger allows for both pull and push forces. Choose between single-acting and double-acting models, and cylinder bodies constructed in either high-alloy steel or anodized aluminum. Enerpac Hollow Cylinders available for sale fully comply to ASME B30.1 (except BRD-RD-Series). 

RCH Series Hollow Hydraulic Cylinders are a single-acting, spring return. Most of these steel cylinders include base mounting holes, collar threads, and are finished with a tough baked enamel exterior coating. 
RRH Series Hollow Hydraulic Cylinders are double-acting for a faster and more controlled plunger return. They’re constructed from steel and finished with a baked enamel exterior coating. Collar threads and base holes are provided as standard for easy fixturing.  
RACH Series Hollow Hydraulic Cylinders are single-acting with a spring return. They feature a strong aluminum body and plunger, therefore offering a lighter solution than steel equivalents. Other features include a hard anodized exterior coating, bolt-on hollow removable saddles, and a steel base plate. 
RARH Series Hollow Hydraulic Cylinders are double-acting for a more controlled hydraulic return. Also constructed from strong aluminum, RARH-Series cylinders offer a lighter solution than steel equivalents. Other features include an anodized exterior coating, carry handles, and a steel base plate. 

•High Tonnage Hydraulic Cylinders：

Enerpac high tonnage hydraulic cylinders, jacks and rams provide the reassurance and durability you can rely on. These cylinders are designed with special features such as low-wear, high pressure seals, replaceable composite plunger support bearings, and a nitrocarburized finish to deliver exceptional safety and durability. Enerpac High Tonnage Cylinders are ideal for multi-point lifting, applications requiring up to 1000 tons and a maximum working pressure up to 10,000 psi (700 bar). Enerpac Cylinders available for sale fully comply to ASME B30.1 (except BRD-RD-Series). 

HCG Series High Tonnage Hydraulic Cylinders are single-acting load return. Other features include stop ring, base mounting holes, collar threads, and certified lifting eyes.
HCR Series High Tonnage Hydraulic Cylinders are double-acting – providing a faster and more controlled plunger return.  
HCL Series High Tonnage Hydraulic Cylinders include a lock nut that provides safe mechanical load holding for extended periods of time. HCL-Series cylinders are single acting load return. 
HCRL Series High Tonnage Hydraulic Cylinders also include a lock nut and are double-acting for a faster and more controlled hydraulic return. Built-in tilt saddle is standard. 
LPL-Series Low Profile Lock Nut Hydraulic Cylinders are low height, single-acting, load return. These also feature a nitrocarburized finish for corrosion protection, lock nut and a built-in tilt saddle to protect against side load.

•Lightweight Hydraulic Cylinders：

Enerpac Lightweight Hydraulic Cylinders are available for sale in a complete range of variants, including single-acting spring return, double-acting, hollow plunger, or lock nut. All models include steel base plates, and some are compatible with our standard CATS tilt saddles.  Enerpac Aluminum Cylinders available for sale are rated for 10,000 psi (700 bar) and fully comply to ASME B30.1 (except BRD-RD-Series). 

RAC-Series Lightweight Hydraulic Cylinders are single-acting, lightweight hydraulic cylinders with a high-strength return spring for rapid cylinder retraction, and an integral stop ring prevents plunger over-travel. RAC cylinders come equipped with bolt-on removable hardened steel saddles and base plates. 
RAR-Series Lightweight Hydraulic Cylinders are double-acting for rapid and more controlled retraction. 
RACL-Series Lightweight, Lock Nut Hydraulic Cylinders are single-acting, spring return and include a lock nut for safe mechanical load holding. RACL cylinders include a stop ring and bolt-on hardened steel saddle and base plate. 
RACH-Series Lightweight, Hollow Hydraulic Cylinders are hollow, single-acting with a spring return.  RACH Cylinders include a steel base plate and bolt-on hardened steel removable saddle. 
RARH-Series Lightweight, Hollow Hydraulic Cylinders are hollow and double-acting to exert both pull and push with hydraulic force. RARH Cylinders include a steel base plate and bolt-on hardened steel removable saddle.

•Lock Nut Hydraulic Cylinders：

Lock nut hydraulic cylinders, jacks and rams provide mechanical load holding for extended periods of time. These are available in Low Height, Lightweight or High Tonnage models. Enerpac Lock Nut Cylinders available are rated for 10,000 psi (700 bar) and for sale fully comply to ASME B30.1 (except BRD-RD-Series). 

HCL-Series Lock Nut Hydraulic Cylinders are single-acting load return for high tonnage applications up to 1,000 tons. These tough performers are designed to withstand 10% side-load up to 90% of maximum stroke. All models in the series feature a nitrocarburized body and plunger to protect against corrosion. 
HCRL-Series Lock Nut Hydraulic Cylinders are double-acting and provide the same benefits as the HCL-Series, but with the added advantage of faster and more controlled retraction of hydraulic return. They also include a built-in tilt saddle. 
LPL-Series Low Profile Lock Nut Hydraulic Cylinders are low height, single-acting, load return. These also feature a nitrocarburized finish for corrosion protection, lock nut and a built-in tilt saddle to protect against side load. 
RACL-Series Lock Nut Hydraulic Cylinders are single-acting, spring return and constructed from tough hard anodized aluminium. Other features include bolt-on removable saddles and steel base plate. 

•Low Height Hydraulic Cylinders：

Low height hydraulic cylinders (also known as a hydraulic pancake jack) feature a compact, low-profile design and maximum power to height ratio for applications in confined spaces where other cylinders will not fit. CUSP, CULP and LPL low profile cylinders are finished with a tough Nitrocarburized coating for enhanced corrosion protection.  Enerpac Low Profile Cylinders for sale are rated for 10,000 psi (700 bar) and fully comply to ASME B30.1 (except BRD-RD-Series). 

RSM-Series Low-Height Hydraulic Cylinders are single-acting spring return for faster retraction and also include mounting holes for easy fixing. 
RCS-Series Low Height Hydraulic Cylinders are single-acting spring return and include threaded holes in the plunger, allowing to mount a tilt saddle. 
CULP-Series Low Profile Hydraulic Pancake Cylinders are single-acting, load return, and ultra-flat. They include a stop ring to limit the maximum stroke. 
CUSP-Series Low Profile Hydraulic Pancake Cylinders are single-acting, load return and ultra-flat. They include a tilting function to help evenly distribute the load. 
LPL-Series Low Profile Lock Nut Hydraulic Cylinders are single-acting, load return and include a lock nut to provide safe mechanical load holding for extended periods of time. These cylinders have a longer stroke than CUSP and CULP cylinders and include a built-in tilt saddle. 
RLT-Series Telescopic Low Height Hydraulic Cylinders provide a longer stroke in a compact low height format and include mounting bolt holes for easy fixturing. 

•Pull Hydraulic Cylinders：

Hydraulic Pull Cylinders are ideal for cable and bar tensioning and other pulling applications. These single-acting spring return cylinders include features such as plunger blow-out protection, a hard chrome-plated plunger, and a baked enamel finish for corrosion resistance. Enerpac Pull Cylinders for sale are rated for 10,000 psi (700 bar) and fully comply to ASME B30.1 (except BRD-RD-Series). 

BRC-Series Hydraulic Pull Cylinders include base, collar and plunger threads to affix optional attachments and accessories such as chains, saddles and extension tubes. 
BRP-Series Hydraulic Pull Cylinders are ideal for heavier pulling applications, with capacities up to 60 ton, include replaceable links or lugs.

•Telescopic Hydraulic Cylinders：

Telescopic hydraulic cylinders feature a longer stroke length to save time and simplify projects where space is limited. They enable to lift a load a greater distance without the need for temporary cribbing.  All Enerpac telescopic cylinders have a nitrocarburized surface treatment inside and out for corrosion protection in the harshest conditions.  Enerpac Telescopic Cylinders available for sale are rated  for 10,000 psi (700 bar) and fully comply to ASME B30.1 (except BRD-RD-Series). 

RLT-Series Low-Height Telescopic Hydraulic Cylinders feature a low-profile design to provide a longer stroke in a confined space. 
RT-Series Multi-Stage Telescopic Hydraulic Cylinders are for longer stroke applications up to 23.62” (600mm). Models are available with 2 or 3 pistons and all include integral tilt saddles. 

•High Cycle, Production Hydraulic Cylinders：

Enerpac RD-Series Double-Acting Hydraulic Cylinders deliver high-precision and high-cycle performance for production applications. RD-Series Production Cylinders are designed with a unique set of mounting configurations that simplify attaching to a fixture. Mounting options include collar, base and plunger threads, and optional attachments include foot mounts, flange mounts, retainer nuts and clevis eyes. The double-acting operation provides both advance and retract force, providing maximum versatility for production and manufacturing applications. All production cylinders available for sale are rated 10,000 psi (700 bar).

•Long Stroke Hydraulic Cylinders：

Long stroke hydraulic cylinders are available in a stroke length from 12 to 48" and in single-acting, double-acting, telescopic and nitrocarburized high-tonnage models. Long stroke cylinders enable you to lift or push a load a greater distance which will save you time and minimize or eliminate the need for temporary cribbing. Enerpac long stroke cylinders available for sale are rated for 10,000 psi (700 bar).

•Hydraulic Climbing Jacks：

BLS-Series, Climbing Jacks are a simple solution for incrementally lifting or lowering a load. In combination with cribbing blocks, climbing jacks are able to overcome the lift height limitations of a cylinder’s plunger stroke length. The double-acting cylinders are specially designed for lifting, lowering and holding a load.